VARIOUS FOR SOLARVENTI® SYSTEMS
The SolarVenti® is so good that it is able to start on bright days even that there might not be any sun.
If heating contribution is important rather than just ventilation, blowing in cold or at least not warm air from outside can be avoided with tis thermostat setting it at the desired start temperature.
Non-return valve to prevent air the wrong way through the air inlet nozzle.
Aluminum Ø 125mm
Patent app. ”Humidity stop”, which also function as a counter valve.
Besides beeing less expencive than a traditional counter valve you get more advantages:
- Prevents flow of air from the house back into the collector
- Decreases wind draft from outside (from the collector when it is not in operation)
- Humidity Stop makes no noise
- Prevents condensation dripping from the valve if there are pipes on a cold loft
- Prevents intake of dust during a building process
- Made in durable stainless steel and resistant to temperature
The Humidity stop is now standard in all SolarVenti® systems.
For insulating between Solarventi® and the wall.
Avoid the entry of winds, water, mosquitoes and more.
Fan 3.4 W
Round Ø 125mm
Installed in all SV7, SV14, and SV20 models.
These special models are manufactured for the extreme conditions of a solar air collector. Especially the temperatures they reach in summer when the collector is stopped.
The SV round fans fit perfectly in the aluminum tubes Ø 125 mm for extraction kits.
Flex pipe fan, 5.1 W or 3.4 W
Flex pipe fan ready with cable Ø 125mm.
For extraction or general ventilation.
Flexible aluminum pipe, 0,50 m when stretched Ø 125mm
Standard compressed aluminum pipe for wall mounting.
Flexible aluminum pipe, 1,75 m when stretched Ø 125mm
Standard compressed aluminum pipe for roof mounting.
Flexible aluminum pipe, 5 m when stretched Ø 125mm
Compressed aluminum tube for roof mounting, false ceilings and hollows in general.
1 meter compresed / 5 meters stretched.