SolarVenti Professional
prof 1 01
  1. Active Solar Heating
  2. Improved Health and Efficiency
  3. Low Installation Costs
  4. No Costs for Dehumidification
  5. Guaranteed Payback
  6. Installation Near Ventilation Units
Positioning of SolarVenti® Professional Units
  1. SolarVenti® Professional is designed for roofs (or ground) with little or no slope.
  2. SolarVenti® Professional is optimally installed facing as close to due souyh as possible.
  3. A deviation of up to 45 degrees from due south is possible, by simply increasing the area of solar collectors.
  4. At the design stage, you will need to take into account the roof hoods, roof windows and other technical equipment on the roof.
prof images 1 1


prof images 1 2
prof images 1 3
prof images 2
Base module
  1. Dimension in mm (L x W x D)
  2. Weight per module in kg
  3. Felt/Absorber

  4. Cover
  5. Pressure drop

  6. Efficiency
  7. Max. energy output
  8. Average energy output
  9. Felt
  10. Other recommendations
  • 1004 x 1970 x 300
  • 10
  • 1,25 m2 absorber / felt per m2 collector, 2 mm black polyester
  • 10 mm Polycarbonate (UV-resistant)
  • 25 Pa / 50 m3/m2 collector
  • 75 Pa / 100 m3/m2 collector
  • 175 Pa / 150 m3/m2 collector
  • 70% at an air flow of 125m3/m2 collector
  • Approx. 742 W/m3 collector
  • 500 kWh/m2 (depends on type of control system
  • 2 - 3 mm Black Polyester
  • Max. length per row of collectors: 20 meters
  • For large air volumes, more rows of collectors are recommended

The professional model has been tested by the Fraunhofer Institute in Germany and approved for international Solar Keymark.
SolarVenti® participated in the German (LUKO project) developing the new EN norms.


Normally, it is not necessary to clean the surface of the collector. It can be washed down with water and mild soap if necessary (do not use solvents).


The filter is self-cleaning and requires a minimum of maintenance.

Expected lifetime

Minimum 15 years.